Topics discussed and feedback
- Scaffolders to use "1m lifts" during dismantle
(1. Minimum 2 boards at all times
(2. Handrail in place at all times (includes transom as required)
- Access to lower bays in scaffold section being dismantled to be physically blocked and monitored
- Barricade or spotter to be used to prevent access to drop zone under bin etc
- Dogman to be constant communication with scaffolders, crane driver and traffic control at all times
- Crane or monitored weight according to SWL of bin and rigging equipment
- Do not fill bin past indicated line
- Weather to be checked prior to and during work activity
- Scaffold bin not to be tied to or supported by scaffold structure
- Adequate ties, braces and structural components to be checked prior to and at the completion of work day
- Scaffolders to rotate labour task and use teamwork and correct manual handling techniques
- Licensed scaffolders only to dismantle scaffold
- Labourers/Groundies/Dogman only to access fully complete decks or work from ground
- Ensure scaffold sections are not overloaded as per the load duty and allowable multiple bays per drawing detail
- All workers to read and sign SWMS.(ASK supervisor if unsure)
- All workers to STOP work if unsafe and report any findings
- Traffic management plan to read and understood by all participating workers and management
- Safety Bulletins
Five-star scaffolding toolbox (Erect, alter and dismantle scaffold general)
- Scaffold to be installed using approved 1m lifts (Handrail always in place and minimum 2 boards or erection ladder
- Barricades or spotter to be used to manage risk of falling objects
- Use team lifts, mechanical advantage or correct manual handling techniques.
- Ensure scaffold is standing neat and not at risk of sliding.
- Wear mandatory PPE for site as well as task appropriate (e.g. face shield when using grinder)
- Only current High risk licensed scaffolders to perform scaffolding tasks. (All non-ticketed persons to work from ground only)
- Report all injuries and near miss incidents immediately to supervisor.
- No climbing up external scaffold. Access to scaffold is only via stair or ladder.
- Safety Bulletins
Topics discussed and feedback
- Forklifts Logbooks to be filled every morning prior to work ($3,500 fines apply)
- Forklift drivers to wear seatbelt at all times
- Maximum speed limit of 10km/hr at all times
- All damage or service requirements to forklift must be reported to supervisor and included in Logbook (Forklift Must be serviced every 3 months and as damage is identified)
- Dipping paint area only to be accessed using PPE provided. Gloves, Respirators)
- Do not stand near forklift when loading/unloading truck
- Make sure all gear is checked for damage
- Do not park forklifts or vehicles in front on emergency doorways, fire extinguishers or fire reel points. ($30,000 fines occur)
- All gear lists are to be ticked and sent through with photo of truck. (HELP YOUR MATES)
- Scaffolders to rotate labour task and use teamwork and correct manual handling techniques
- FLT Faults reporting (Review procedure)
- PPE
- Passing gear over the top
- Loading/unloading procedures
- Using portable equipment
- Yard cleanup